Rack mounted (fix gain or programmable) current transducers. Made for ultra high accuracy. 14 models. DC, AC pulse currents' measurements from 40 to 24000 ADC nominal with galvanic isolation. Excellent linearity, from 1 to 10 ppm. High resolution. Initial offset: < 2 ppm. Very low offset drift: from 0.1 to 0.6 ppm/K. Overall accuracy @ Ipn @ +25°C: between < +/- 3 ppm and < 12 ppm. Wide frequency bandwidth from DC up to 500 kHz (+/- 3 dB). Closed-Loop Fluxgate technology. Electrostatic shield between primary and secondary in the heads. Power supply 100-240 VAC, 50-60 Hz. Products made up of one measuring head in a side and one separated electronic in the other side connected together via a cable. Operating temperature range from +10 to +40°C for the electronics and from 0 to +55°C for the measuring heads. D-Sub 15 female connector used for the analogue output. D-Sub 9 male connector used for the status output. Really quick response time (from <1 µs to <2 µs). 600 A and 2000 A models are programmable in the needed range thanks to some programming plugs to add on the measuring heads. 5 measuring heads are available according to the current to measure and to the aperture needed for the primary conductor (from 25.4 mm up to 150.3 mm diameter).
ITZ 2000-SPR FLEX ULTRASTAB
High accurate current transducer. 2000 ADC nominal. Current output, Programmable in the range 125 A to 2000 A with programming plugs
- Series
-
ITZ
- Measurement
-
電流センサ
- Nominal Value
-
2000 A
- Measuring Range
-
2000 A
- Second. Nominal Signal
-
電流
- Second. Nominal Signal Value
- 瞬時 1000 mA
- Primary Signal
-
AC + DC
- Supply Voltage
-
外部AC
- Supply Voltage Range
- 100 - 240 V
- Accuracy
- 0.0004 %
- Op. Temperature
- 10 °C / 40 °C
- 技術
-
クローズドループ・フラックスゲート IT タイプ
- Mounting
-
パネル
- アプリケーション
-
高精度
Relative information
同じシリーズの製品
ITZ 6100-S FLEX ULTRASTAB
High accurate current transducer. 6100 ADC nominal. Current output.
ITZ 10000-S FLEX ULTRASTAB
High accurate current transducer. 10000 ADC nominal. Current output.
ITZ 10000-SB FLEX ULTRASTAB
High accurate current transducer. 10000 ADC nominal. Current output and voltage +/- 10 V output.
ITZ 16000-S FLEX ULTRASTAB
High accurate current transducer. 16000 ADC nominal. Current output.
ITZ 16000-SB FLEX ULTRASTAB
High accurate current transducer. 10000 ADC nominal. Current output and voltage +/- 10 V output.
ITZ 2000-S FLEX ULTRASTAB
High accurate current transducer. 2000 ADC nominal. Current output.
ITZ 2000-SB FLEX ULTRASTAB
High accurate current transducer. 2000 ADC nominal. Current output and voltage +/- 10 V output.
ITZ 2000-SBPR FLEX ULTRASTAB
High accurate current transducer. 2000 ADC nominal. Current output and voltage +/- 10 Volt output, Programmable in the range 125 A to 2000 A with programming plugs
ITZ 24000-S FLEX ULTRASTAB
High accurate current transducer. 24000 ADC nominal. Current output.
ITZ 5000-S FLEX ULTRASTAB
High accurate current transducer. 5000 ADC nominal. Current output.
ITZ 5000-SB FLEX ULTRASTAB
High accurate current transducer. 5000 ADC nominal. Current output and voltage +/- 10 V output.