DC, AC pulse currents' measurements from 200A up to 800ARMS with galvanic isolation for PCB mounting for low voltage applications. 6 models with an unique size. 22 mm diameter aperture for the primary conductor. Operating temperature range: -40 to +105°C. Single supply 0, +5 Volt,Voltage output. Ratiometric offset. Fixed gain. Reference access.
HTFS 800-P
800 ARMS nominal. To be panel mounted onto PCB with 4 holes 3.5 mm diameter. Secondary connections to be soldered on PCB.
- Series
-
HTFS
- Measurement
-
Current
- Nominal Value
-
800 A
- Measuring Range
-
1200 A
- Second. Nominal Signal
-
Voltage
- Second. Nominal Signal Value
- Instantaneous Uc/2 +/- 1.25 V
- Primary Signal
-
AC + DC
- Supply Voltage
-
External DC Unipolar
- Supply Voltage Range
- 5 - 5 V
- Accuracy
- 1 %
- Op. Temperature
- -40 °C / 105 °C
- Technology
-
Open loop Hall effect
- Mounting
-
PCB
- Applications
-
DrivesPower SuppliesRenewable EnergiesWelding
Relative information
Product of the same series
HTFS 200-P
200 ARMS nominal. To be panel mounted onto PCB with 4 holes 3.5 mm diameter. Secondary connections to be soldered on PCB.
HTFS 200-P/SP2
200 ARMS nominal. To be mounted onto PCB with 4 pins 1 mm diameter to be soldered as the secondary connections
HTFS 400-P
400 ARMS nominal. To be panel mounted onto PCB with 4 holes 3.5 mm diameter. Secondary connections to be soldered on PCB.
HTFS 400-P/SP2
400 ARMS nominal. To be mounted onto PCB with 4 pins 1 mm diameter to be soldered as the secondary connections
HTFS 600-P
600 ARMS nominal. To be panel mounted onto PCB with 4 holes 3.5 mm diameter. Secondary connections to be soldered on PCB.
HTFS 800-P/SP2
800 ARMS nominal. To be mounted onto PCB with 4 pins 1 mm diameter to be soldered as the secondary connections